1. 스위치 호스트 네임 설정
– Switch#conf t
– Switch(config)#hostname Seoul_L2_SW1
2. 패스워드 설정 및 cisco 계정 사용 중지
– Seoul_L2_SW1(config)#username admin secret ********
– Seoul_L2_SW1(config)#enable secret ********
– Seoul_L2_SW1(config)#no username cisco
3. 관리용 IP 설정
– Seoul_L2_SW1(config)#int vlan 1
– Seoul_L2_SW1(config-if)#no shut
– Seoul_L2_SW1(config-if)#ip address 192.168.0.11 255.255.255.0
4. 기본 게이트웨이 설정
– Seoul_L2_SW1(config)#ip default-gateway 192.168.0.1
5. 텔넷 설정
– Seoul_L2_SW1(config)#line vty 0 4
– Seoul_L2_SW1(config-line)#password ********
6. 저장
– Seoul_L2_SW1(config)#wr
7. VLAN 생성하기
– Seoul_L2_SW1_PoE#conf t
– Seoul_L2_SW1_PoE(config)#vlan 10
– Seoul_L2_SW1_PoE(config-vlan)#name DEVICE
8. VLAN 할당하기
– Seoul_L2_SW1_PoE#conf t
– Seoul_L2_SW1_PoE(config)#int range fa 0/1 – 20
– Seoul_L2_SW1_PoE(config-if-range)#switchport mode access
– Seoul_L2_SW1_PoE(config-if-range)#switchport access vlan 20
9. TRUNK 할당하기
– Seoul_L2_SW1_PoE#conf t
– Seoul_L2_SW1_PoE(config)#interface range fa 0/21 – 24
– Seoul_L2_SW1_PoE(config-if-range)#switchport mode trunk
– Seoul_L2_SW1_PoE(config-if-range)#description ##Access_Point##
– Seoul_L2_SW1_PoE(config)#int range gi 0/1 – 2
– Seoul_L2_SW1_PoE(config-if-range)#switch mode trunk
– Seoul_L2_SW1_PoE(config-if-range)#description ##L3_UpLink##
– Seoul_L2_SW1_PoE(config-if-range)#switchport trunk allowed vlan add 1,10,20,254
답글 남기기